STEAM-SOLV

For Heavy Duty Industrial Equipment Degreasing

STEAM-SOLV was originally formulated for use prior to steam cleaning earth moving equipment engines in an effort to assist in the rapid removal of heavily encrusted hydrocarbon type soils. The product will rapidly penetrate and loosen oil, grease, and stubborn carbonized soil thereby reducing time and labor costs of equipment cleaning. STEAM-SOLV was specifically formulated for environmental safety and compatibility in waste water treatment and recycling systems. In addition to heavy equipment cleaning STEAM-SOLV has proven to be an excellent hot and cold tank degreaser and has won approval in numerous industrial cleaning applications. STEAM-SOLV is truly and industrial strength degreaser. Care should be exhibited in using the product. Not recommended for aluminum or magnesium. May cause damage to some painted surfaces.


--- Suggested Uses ---

Heavy Equipment Degreasing              Using a garden type sprayer, apply liberal amount of concentrated Steam-Solv to the oil and grease encrusted areas and allow a 5 to 10 minute dwell time followed with steam/pressure washing. Steam/Pressure Washing                                                  Use Steam-Solv at dilutions of 1 to as much as 4 ounces per gallon of water at the gun.
Engine Degreasing                                        Depending upon the severity of soil, use Steam-Solv in concentrate form or dilute with 50% water.   Spray entire engine, allow dwell time, and pressure/steam wash. Garbage Trucks & Refuse Containers         Depending upon severity of soil, use Steam-Solv concentrate or dilute with water, followed with pressure washing.
Truck/Bus Frames, Wheels & Tires Apply Steam-Solv to frame, fuel tanks, mud-flaps, wheels and tires to rapidly remove gray road film and oxidation. Cold Tank Degreasing                                                           Use Steam-Solv concentrate or dilute Steam-Solv with 1 to as much as 4 parts of water.   Allow parts to soak.  Rinse and dry.
Hot Tank Degreasing                                       Dilute Steam-Solv with 1 to as much as 4 parts of water.  Do not exceed 180 degrees F.   Allow parts to soak and then rinse thoroughly with water.  To prevent flash rusting, follow water rinse with a solution of K184 or K123 corrosion inhibitor. Floors & Industrial Manufacturing Areas        Depending upon the soil type (oil, grease, inks, etc.) and method of application (mop, auto-scrubber), Steam-Solv can be diluted 2 ounces to as much as 10 ounces per gallon of water.  Apply solution, allow short dwell time, scrub and pickup spent solution.
Printing Equipment, Printing Plates Use Steam-Solv in concentrate or dilute with equal parts of water.  Apply with sprayer or towel.  Wipe dry.  For best results, experiment with different dilution ratios for cleaning various types of ink.

STEAM-SOLV is an industrial product and not intended for household use. Keep out of reach of children

STEAM-SOLV is available in 55 gallon drums and bulk totes

STEAM-SOLV - One Product For All Of Your Degreasing Needs

User Safe - Environmentally Safe - Economical To Use