Cal-Tek Industries... | ||
STEAMITE: for machine shop maintenance | ||
OPERATION | DILUTION | APPLICATION |
MACHINE COOLANT SYSTEM CLEANER |
1 GALLON STEAMITE TO 20 GALLONS COOLANT |
Add STEAMITE to coolant solution 3 to 4 hours before dumping. Raises pH of coolant. Flushes out pipes, pumps & sumps. Removes stench. Retards dermatitis. |
MACHINE & EQUIPMENT CLEANING |
20 parts water to 1 part STEAMITE | Spray or apply with wet cloth then apply with dry cloth. |
METAL PARTS & TOOL DEGREASING |
20 parts water to 1 part STEAMITE | Soak until grease & oil is emulsified; if possible agitate for fast action. Large metal areas can be degreased by spray or steam gun. |
STEAM CLEANING (MEDIUM DUTY) |
15 parts water to 1 part STEAMITE | Goes 100% into quick solution, won't clog or corrode steam cleaners. Removes all grease, oil & heavy dirt. Safe on all metals & paint. No fumes. |
LIQUID HAND SOAP | 5 parts water to 1 part STEAMITE | Removes all grime & grease. Leaves hands clean and soft. |
FILTERS IN VENTILATION OR FILTERING SYSTEMS |
20 parts water to 1 part STEAMITE | Use tank at room temperature. Soak for 1 minute with agitation. Rinse with hot water. Coat with oil if necessary. |
WALLS: painted, brick, tile, cement, etc. | 2 oz. STEAMITE per gallon of water for ordinary conditions. 4 oz. STEAMITE per
gallon of water |
Use spray, cloth, brush or sponge. Start at bottom of wall & work up. This prevents streaking of dirty wall below. Cement & brick walls which are to be repainted can be effectively cleaned with steam or spray use STEAMITE as the detergent. |